Info Image

Predictions for the Future of Broadband Networks

Predictions for the Future of Broadband Networks Image Credit: kenny001/Bigstockphoto.com

This article is co-authored by Ric Johnsen.

The most important trends driving broadband networks in the coming year are a natural extension of the progress and challenges we’ve seen in 2021. In particular, the global response to COVID-19, building momentum in network investments, and continued innovation in broadband technology are all contributing to the next phase of evolution in broadband. We have identified six areas that we believe will steer this evolution in 2022: continued bandwidth growth, extended access to broadband, fiber deployment expansions, augmentations in DOCSIS® and DAA, increased intelligence in cloud-native network management software, and the changing design of modern broadband technology.

#1: Bandwidth Growth

In the past year, we have observed an approximate 20% growth rate in both upstream and downstream residential average bandwidth usage during the busy-hour window, with corresponding spikes and dips occurring as nations and cities locked down and returned to the “new normal” with each of the COVID waves. We expect that activity to continue.  And as we contend with the outgrowth of consequent remote work and remote schooling, customer demand and expectations for higher peak bandwidth levels will also increase. In the future, we’ll see service level agreements (SLAs) build beyond the current ranges to accommodate these changing usage habits. And, in turn, these higher SLAs will give rise to new bandwidth-intensive services like augmented reality (AR) and virtual reality (VR).

#2: Broadband Access

In addition to increasing bandwidths, the coming years will also build momentum around a more ubiquitous distribution of broadband service to many under-served areas. Several funds and initiatives to build more equitable access - in particular, the Rural Digital Opportunity Fund (RDOF) and the Infrastructure Bill - will be driving technology and device sales across the board as more subscribers gain access to broadband. We will see fiber-based XGS PON and coaxial-based DOCSIS 3.1 coming to many new areas that have not previously seen high-quality bandwidth services, including both rural and inner-city areas. These investments will create a network and roll-on effect with commensurate increases in revenue and the ability to add more staff to local operators. We expect to be seeing exciting new economies and capabilities coming from rural and inner-city operators in the next year.

With all of the upcoming bandwidth and subscriber growth described above, CommScope® Broadband Networks is focusing its efforts on four key areas for the future: fiber deployments, DOCSIS deployments, intelligent network management software, and new technology adoption. 

#3: Fiber Deployment

For many operators, fiber deployments will grow rapidly over the next several years. For example, some cable operators are planning for fiber deeper HFC deployments to help reduce Service Group sizes and congestion. These deployments will utilize Ethernet and PON to provide connectivity to DAA nodes in the future. Some telco and cable operators who are already deploying PON solutions will likely be expanding those solutions to more geographic regions (due to drivers like the aforementioned RDOF program). Other cable operators will begin to transition from coaxial-based broadband solutions towards PON-based broadband solutions (both EPON and XGS PON) in the future.

These transitions are already starting, and CommScope is already addressing the needs of such through many differentiated product lines. Fiber deployments will require the fiber optic cabling systems and connectivity solutions (terminals, fiber splice closures, etc.) that CommScope offers. In addition, the OLT and ONT products that manage and transmit the optical signals across the deployed fibers are also important product focus areas for CommScope. With Node-based OLTs and Shelf-based OLTs supporting both EPON and XGS PON technologies, CommScope will be providing the key technologies needed by the operators in their fiber deployments for many years to come.

#4: DOCSIS and DAA Evolution

2022 will be a big year for DOCSIS, as we begin the deployment of the last phases of DOCSIS 3.1 features. We will see significant of bandwidth augmentation upgrades to 85 MHz upstream mid-split, 204 MHz upstream high-split and downstream 1.2 GHz. Many of these upgrades are in direct response to the uptick in bandwidth - especially in the upstream - related to COVID-19. We will also see more enablement of DOCSIS 3.1 OFDMA and OFDM channels. These final stage DOCSIS 3.1 upgrades will serve as an important bridge between today’s networks and the DOCSIS 4.0 networks of 2-3 years from now. It is going to be an exciting time for gamers too, with low latency DOCSIS coming online. We foresee LLD as a new revenue stream for operators targeting the gaming segment, as well as a competitive feature set that will improve the general broadband experience. LLD-enabled.

We expect cable operators to continue their trend towards distributed access architecture (DAA) rollouts. These DAAs lay the groundwork for future technology injections, such as the higher bandwidths of DOCSIS 4.0 solutions. We have observed a very steep uptick in operators deciding to jump directly to Remote MACPHY architectures. However, the key for the vast majority of operators is the flexibility to choose an architecture and pathway that works best with their unique network. Luckily, a host of technology innovation—like our RxD, which enables a Remote PHY deployment to be upgraded to Remote MACPHY via software - will provide many choices for operators to achieve their DAA of choice.

#5: Cloud-Native Network Management Software

The target for future network management software is to capitalize on the increased availability of streaming analytics collected from many DAA devices in the field. This will provide quicker access to much more data covering more network operational parameters than ever before. Virtualized software in the cloud will utilize newly developing AI/ML techniques to rapidly digest the data and identify looming problems in the CIN network, the HFC Plant, the DOCSIS network or the PON network. These automated network management systems should correct problems before subscribers begin to feel any negative effects. Overall, this approach will ensure that future networks are continuously monitored and adjusted for optimal performance.

#6: Technology Design

One of the greatest challenges for vendors in the previous year has been designing broadband network products in an age of shortages. But modularity and efficiency have emerged in direct response to global supply chain constraints and are some of the trends that will continue well into next year. Additionally, improving the environmental footprint of devices and components is a large part of how vendors like CommScope are approaching challenges to designing the next generation of broadband products. For example, we’re leading initiatives to drive down power consumption, lower operating costs, and reduce our energy footprint. These are all a part of a larger movement to improve our industry through innovation.

The coming year, as well as the years that follow, will be defined by these evolutions and incremental innovations. We know where the industry is headed, and we are seeing operators take the necessary steps in building a foundation towards that future- but the key is in the details.

There are still many pathways for operators to deliver their networks of the future and define the way that billions of people around the world experience broadband and video. Each of these six areas will inform those pathways as operators balance their broader vision with advances in technology to decide the future of broadband networks.

Mr. Johnsen was appointed Leader of our Broadband Networks Segment in July of 2021. Prior to becoming the Broadband Networks Segment Leader, Mr. Johnsen successfully led the Network Cable and Connectivity business for many years. Before joining CommScope, Ric’s experiences spanned across numerous businesses and regions, including serving as president and CEO of Alloptic and Vice President of Product Management and Engineering at OFS. He served in a number of positions at Alcatel including Vice President for Business Development for Europe and Asia - Optical Fiber and Fiber Cable.

NEW REPORT:
Next-Gen DPI for ZTNA: Advanced Traffic Detection for Real-Time Identity and Context Awareness
Author

Tom Cloonan, PhD, is the interim chief technology officer at CommScope. Dr. Tom Cloonan joined CommScope through its acquisition of ARRIS, where he served as CTO of the Network and Cloud segment, among other positions, since 2002. Dr. Tom Cloonan was previously the CTO and CEO and co-founder of the CMTS start-up company CADANT. Dr. Tom Cloonan worked as a hardware/software/DSP/ASIC designer, architect and Distinguished Member of the Technical Staff at Lucent Bell Laboratories, focusing on voice, ATM and routing programs. Dr. Tom Cloonan has a BSEE degree from Illinois Institute of Technology, a MSEE degree from Purdue University and a PhD in Physics from Heriot-Watt University in Scotland. He is also a Fellow of the Institute of Electrical and Electronics Engineers, and a 2019 inductee of the Cable TV Pioneers.

PREVIOUS POST

2022 Cloud Roadmap: Transitioning Media Workflows to the Public Cloud

NEXT POST

New Maturity in Contact Center Operations